0-827551-3 Datasheet
Connector: Wire To Board Connector: RCP: 2
Download: 0-827551-3 Datasheet 
0-827551-3
Connector: Wire To Board Connector: RCP: 2
Environmental sealing
Flexible after installation to avoid obstruction
Simple to install
Temperature rated to +105oC
continuous
RBK-MTS
Flexible, two part connector sealing system for mini-timer connectors
Rbk-mts Is A Flexible, Two Part Connector Seal Designed To Provide Moisture Proof Encapsulation Of
Amp Junior Timer Connectors. The Product Consists Of A Single Wall, Heat-shrinkable Tubing And An
adhesive clip which can accommodate a
Wide Range Of Wire Sizes. The Clip Is Positioned At The Back Of The Connector Over The Wires And The
Tubing Placed Over The Lip Of The Connector. On Heating The Adhesive Clip Melts And Flows Around The
wires as well as the back of the connector.
When Cooled, The Rear Of The Connector And Wires Are Encapsulated By A Moisture Proof Barrier And
the contact given antibackout protection.
Temperature rating
Operating temperature range:
-40 C to +140 C
Ordering information
Tubing as supplied
Tubing recovered
Clip - two way H
Clip - three way
Number AMP Connector of ways
AMP 0-827551-3 2 AMP 0-825414-3 2 AMP 0-827581-1 3
Tubing Inside diameter D (min) Expanded as supplied mm 15.0 19.0
d (max) Recovered after heating mm 4.0 5.0
Length
L (nom) mm
60.0 115.0
Clip Length
Height