0.3 PSI-D-CGRADE-MV Datasheet

Pressure Sensor, Millivolt Output Pressure Sensors

Stock & Ordering: Octopart | Findchips
Pressure Sensor, Millivolt Output Pressure Sensors
all sensors
Millivolt Output Pressure Sensors
C-Grade Pressure Sensors
0 to 0.3 PSI to 0 to 100 PSI Pressure Ranges
1 % linearity version
Temperature Compensated
Calibrated Zero and Span
Medical Instrumentation
Environmental Controls
The Millivolt Output Pressure Sensors Is Based Upon A Proprietary Packaging Technology To Reduce
Output Offset Or Common Mode Errors. This Model Provides A Calibrated Millivolt Output With Good
Output Offset Characteristics. In Addition The Sensor Utilizes A Silicon, Micromachined, Stress
Concentration Enhanced Structure To Provide A Very Linear Output To Measured Pressure.
These Calibrated And Temperature Compensated Sensors Give An Accurate And Stable Output Over A Wide
Temperature Range. This Series Is Intended For Use With Non-corrosive, Non-ionic Working Fluids Such
As Air, Dry Gases And The Like. The C-grade Is A Lowest Cost Version Of The Millivolt Output
pressure sensors.
The Output Of The Device Is Ratiometric To The Supply Voltage And Operation From Any D.c. Supply
voltage up to +16 V is acceptable.
a 6296 San Ignacio, Suite E & F, San Jose, CA 95119
Physical Dimensions
0.25 (6.4)
1.08 (27.4)
Pin Size 0.010 x 0.020 (0.25 x 0.50)
0.174 to 0.190 (4.4 to 4.8)
0.10 Typical (2.54) Pin 1 2 3 4 5 6
0.21 (5.3)
0.42 (10.5)
0.48 (12.2)