0.3 PSI-D-CGRADE-MV-DIP Datasheet

Pressure Sensor, Millivolt Output Miniature Medium Pressure Sensors

Stock & Ordering: Octopart | Findchips
Pressure Sensor, Millivolt Output Miniature Medium Pressure Sensors
Millivolt Output Miniature Medium Pressure Sensors
C-Grade Pressure Sensors
0 to 0.3 PSI to 0 to 30 PSI Pressure Ranges
1 % linearity version
Temperature Compensated
Calibrated Zero and Span
Medical Instrumentation
Environmental Controls
The Millivolt Output Pressure Sensors Is Based Upon A Proprietary Packaging Technology To Reduce
Output Offset Or Common Mode Errors. This Model Provides A Calibrated Millivolt Output With Good
Output Offset Characteristics. In Addition The Sensor Utilizes A Silicon, Micromachined, Stress
Concentration Enhanced Structure To Provide A Very Linear Output To Measured Pressure.
These Calibrated And Temperature Compensated Sensors Give An Accurate And Stable Output Over A Wide
Temperature Range. This Series Is Intended For Use With Non-corrosive, Non-ionic Working Fluids Such
As Air, Dry Gases And The Like. The C-grade Is A Lowest Cost Version Of The Millivolt Output
pressure sensors.
The Output Of The Device Is Ratiometric To The Supply Voltage And Operation From Any D.c. Supply
voltage up to +16 V is acceptable.
Physical Dimensions
Dual in Line (SDXL)
0.50 (12.7) 654
0.62 (15.7)
0.280 (7.1)
Pin 1 2 3
0.10 Typical (2.54)
0.080 O.D. (2.00)
Dual in Line (DIP)
Two Pressure Port Same Side Gage Version single port on top
Pressure Sensor Characteristics
MAXIMUM RATINGS Environmental Specifications