0030C-001 Datasheet

Tools - Wire Strippers And Accessories - ELEMENT PTS-30C/3-C,PTS-40

Stock & Ordering: Octopart | Findchips
Tools - Wire Strippers And Accessories - ELEMENT PTS-30C/3-C,PTS-40
Thermal & Mechanical Wire Strippers
Thermal Wire Strippers
PVC Insulation PTS - 10/20 Series
AC line or battery powered
Fast, small, portable
Safe to use
No wire or shield nicking
Solid, stranded or shielded wires
Table mounted or hand held
Low Cost
This Thermal Wire Stripper Is A Small, Lightweight, Low Power, Line Operated Wire Stripping Tool
Which Far Surpasses All Previous Devices In Safety, Versatility And Economy. The Patented Design
Incorporates A Uniquely Shaped Nichrome Heating Element, Which Heats Up Quickly (less Than Five
Seconds) To An Optimal Temperature Of 450 F And Efficiently Strips Thermoplastic Insulation From
Solid, Stranded Or Shielded Wires From #14 To #30 Awg, And Will Not Burn The Skin If Accidentally
Touched Due To Its Low Power And Minimal Mass. The Smooth Design Heating Element Eliminates Nicks
And Broken Strands Of Conductors And Reduces Lead Pull On Sensitive Components. The Comfortably
Sized Tool May Be Easily Handheld, Which Is Ideal For Use In Hard To Reach Places. The Thermal Wire
Stripper May Be Conveniently Table-mounted For One-hand Operation. Model Pts-10 Operates On 120v Ac,
60 HZ, with a power consumption of only 3 Watts.
Different line voltages are available on special orders.
This Model Operates Exactly The Same As The Pts-10. The Pts-100 Is Powered By A Universal Switching
Power Supply Housed In A Separate Enclosure Which Makes The Tool Very Light (less Than 3 Oz.). The
Pts-100 Stripper Is Also Equipped With An In-line On/off Switch And A Built-in Temperature
Controller. This Allows The User To Precisely Match The Temperature Of The Stripping Element To The
melting temperature of insulation in a vast variety of different types of wire.
Dimensions - 4.3 In. (110 Mm.) X 2.00 In. (51 Mm.) X 1.8 In. (46 Mm.). Weight - 13 Ounces (.37 Kg.)
Line Cord - #18 AWG 2 wire flexible cord, 6 feet (1.8 m.) long
ADDITIONAL Specifications: PTS-100
Dimensions - (power Supply) 3.00 In. (76 Mm) X 2.00 In. (50 Mm) X 1.4 In (35 Mm) Weight - (power
Supply) 4.4 oz. (0.125 kg) Input Power - 100-240 VAC 50/60 Hz
Stripping head only
Power supply only
P/N 0010-001
PTS-10 & PTS-1
5142 Rhodesdale-Vienna Road
Rhodesdale, MD 21659
Tel: 410-444-4010
Fax: (410) 254-9566
Thermal Wire Strippers
PATCO Thermal Wire Stripper PTS-10 step by step operation.
Use This Method To Strip Short Pieces Of Wire. For Higher Production, The Thermal Wire Stripper Can
be temporarily table mounted using double stick tape for one-hand operation.
1) Align The Wire With The Largest Opening In The Element. 2) Insert The Wire As Far As Required
Using Visual Judgment Of Adjustable Wire Stop. 3) Move The Wire Towards The Tapered End Of The
stripping element, applying pressure
Until Resistance Is Felt. 4) Rotate The Wire 1/4 Turn Maintaining Slight Pressure Into The "v", So
the insulation
Is Completely Cut. 5) Without Releasing The Slight Side Pressure, Pull The Wire Away From The
Element. 6) This Will Remove The Insulation Slug Without Any Damage To The Conductor.