CC1000 Datasheet
RF Transceiver
Download: CC1000 Datasheet 
CC1000
RF Transceiver
The Cc1000 Is An Ultra Low-power Single-chip Rf Transceiver Mainly Intended For The 315, 433, 868
And 915 Mhz Bands. It Has Been Specifically Designed To Comply With The Most Stringent Requirements
of the low power radio market.
An Unique Uhf Rf Transceiver The Cc1000 Is A True Single-chip Uhf Transceiver Designed For Very Low
Power Consumption And Low Voltage Operation. Based On A Pure Cmos Technology This Is The First
Product Available That Offers A Unique Combination Of Low Cost And High Integration, Performance And
Flexibility, Thus Setting A New Standard For Short-range Wireless Communication Devices.
The Cc1000 Is Designed Primarily For Fsk Systems In The Ism/srd Bands At 315, 433, 868 And 915 Mhz,
But Can Easily Be Programmed For Operation At Other Frequencies Between 300 Mhz And 1000 Mhz.
Ideal for battery
Applications The CC1000 operates from 2.3 - 3.6 V making it ideal for battery
Applications Using E.g. Single Lithium 3 V Coin Cells. The Current Consumption Is Only 7.7 Ma In
Receive Mode And From Only 5.3 Ma (-20 Dbm) To 27.8 Ma (10 Dbm) In Transmit Mode Depending On The
Output Power. In Power-down Mode, The Cc1000 Draws Merely 0.2 A, An Important Feature For Battery
Applications.
Since Very Few External Components Are Required To Make A Complete Transceiver, The Cc1000 Is The
perfect choice for even the smallest size
Applications.
All You Need To Get Started...... And Finished The Cc1000 Development Kit Makes It Very Easy To
Evaluate The Performance Of The Cc1000 Chip, And In A Short Time, Designers Can Develop Their Own Rf
Modules Based On This Reference Design. The Smartrf Studio Software Package Which Is Included,
Provides The Flexibility Needed To Automatically Generate Configuration Data Used By The
microcontroller.
The perfect choice for low-cost
Applications The Low Power Consumption And The High Integration Level Make The Cc1000 Ideal For Any
low-cost battery operated system.
Block diagram CC1000
Design: Id & Layout AS Reklamebyr
Based On Chipcon S Proprietary Smartrf Technology, The Chipcon Rf-ics Offer The Market S Most
Competitive Solutions To Meet The Stringent Demands Of Today S Wireless Communication.
FEATURES
Single-chip RF transceiver
Programmable frequency (300-1000 MHz)
Very low current consumption (RX: 7.7 mA)
Very few external components required
Low supply voltage (2.3 - 3.6 V)
High receiver sensitivity (-107 dBm)
RSSI output
Integrated bit synchronizer
FSK data rate up to 19.2 kBaud
CC1000 Datasheet
315/433/868/915 MHz RF Transceiver
Download: CC1000 Datasheet
CC1000
315/433/868/915 MHz RF Transceiver
SmartRF CC1000
CC1000 Single Chip Very Low Power RF Transceiver
Applications
Very low power UHF wireless data transmitters and receivers
315 / 433 / 868 and 915 MHz ISM/SRD band systems
RKE - Two-way Remote Keyless Entry
Home automation
Wireless alarm and security systems
AMR - Automatic Meter Reading
Low power telemetry
Product
Description
Cc1000 Is A True Single-chip Uhf Transceiver Designed For Very Low Power And Very Low Voltage
wireless
Applications. The Circuit Is Mainly Intended For The Ism (industrial, Scientific And Medical) And
Srd (short Range Device) Frequency Bands At 315, 433, 868 And 915 Mhz, But Can Easily Be Programmed
for operation at other frequencies in the 300-1000 MHz range.
The Main Operating Parameters Of Cc1000 Can Be Programmed Via An Easy-tointerface Serial Bus, Thus
Making Cc1000 A Very Flexible And Easy To Use Transceiver. In A Typical System Cc1000 Will Be Used
together with a microcontroller and a few external passive components.
FEATURES
True single chip UHF RF transceiver
Very low current consumption
Frequency range 300 - 1000 MHz
Integrated bit synchroniser
High sensitivity (typical -110 dBm at 2.4
kBaud)
Programmable output power -20 to
10 dBm
Small size (TSSOP-28 package)
Low supply voltage (2.1 V to 3.6 V)
Very few external components required
No external RF switch / IF filter required
RSSI output
Single port antenna connection
CC1000 is based on Chipcon's SmartRF technology in 0.35 m CMOS.
FSK data rate up to 76.8 kBaud
Complies with EN 300 220 and FCC
CFR47 part 15
CC1000 Datasheet
IC RF TRANSCEIVER 1000MHZ 5V 28TSSOP TUBE
Download: CC1000 Datasheet
CC1000
IC RF TRANSCEIVER 1000MHZ 5V 28TSSOP TUBE
SmartRF CC1000
CC1000 Single Chip Very Low Power RF Transceiver
Applications
Very low power UHF wireless data transmitters and receivers
315 / 433 / 868 and 915 MHz ISM/SRD band systems
RKE - Two-way Remote Keyless Entry
Product
Description
Cc1000 Is A True Single-chip Uhf Transceiver Designed For Very Low Power And Very Low Voltage
wireless
Applications. The Circuit Is Mainly Intended For The Ism (industrial, Scientific And Medical) And
Srd (short Range Device) Frequency Bands At 315, 433, 868 And 915 Mhz, But Can Easily Be Programmed
for operation at other frequencies in the 300-1000 MHz range.
The Main Operating Parameters Of Cc1000 Can Be Programmed Via A Serial Bus, Thus Making Cc1000 A
Very Flexible And Easy To Use Transceiver. In A Typical System Cc1000 Will Be Used Together With A
microcontroller and a few external passive components.
FEATURES
True single chip UHF RF transceiver
Very low current consumption
Frequency range 300 - 1000 MHz
Integrated bit synchroniser
High sensitivity (typical -110 dBm at 2.4
kBaud)
Programmable output power -20 to
10 dBm
Small size (TSSOP-28 or UltraCSP
package)
Low supply voltage (2.1 V to 3.6 V)
Very few external components required
No external RF switch / IF filter
required
Home automation
Wireless alarm and security systems
AMR - Automatic Meter Reading
Low power telemetry
Game Controllers and advanced toys
CC1000 is based on Chipcon's SmartRF technology in 0.35 m CMOS.
RSSI output
Single port antenna connection
FSK data rate up to 76.8 kBaud
CC1000 Datasheet
CC1000 - IC TELECOM, CELLULAR, RF AND BASEBAND CIRCUIT, PDSO28, 4.40 MM, TSSOP-28,
Download: CC1000 Datasheet
CC1000
CC1000 - IC TELECOM, CELLULAR, RF AND BASEBAND CIRCUIT, PDSO28, 4.40 MM, TSSOP-28,
CC1000
CC1000 Single Chip Very Low Power RF Transceiver
Applications
Very low power UHF wireless data transmitters and receivers
315 / 433 / 868 and 915 MHz ISM/SRD band systems
RKE - Two-way Remote Keyless Entry
Product
Description
Cc1000 Is A True Single-chip Uhf Transceiver Designed For Very Low Power And Very Low Voltage
wireless
Applications. The Circuit Is Mainly Intended For The Ism (industrial, Scientific And Medical) And
Srd (short Range Device) Frequency Bands At 315, 433, 868 And 915 Mhz, But Can Easily Be Programmed
for operation at other frequencies in the 300-1000 MHz range.
The Main Operating Parameters Of Cc1000 Can Be Programmed Via A Serial Bus, Thus Making Cc1000 A
Very Flexible And Easy To Use Transceiver. In A Typical System Cc1000 Will Be Used Together With A
microcontroller and a few external passive components.
FEATURES
True single chip UHF RF transceiver
Very low current consumption
Frequency range 300 - 1000 MHz
Integrated bit synchroniser
High sensitivity (typical -110 dBm at 2.4
kBaud)
Programmable output power -20 to
10 dBm
Small size (TSSOP-28 or UltraCSP
package)
Low supply voltage (2.1 V to 3.6 V)
Very few external components required
No external RF switch / IF filter
required
Home automation
Wireless alarm and security systems
AMR - Automatic Meter Reading
Low power telemetry
Game Controllers and advanced toys
CC1000 is based on Chipcon's SmartRF technology in 0.35 m CMOS.
RSSI output
Single port antenna connection
FSK data rate up to 76.8 kBaud
Complies with EN 300 220 and FCC