MC33186DH1
PMIC - Motor, Bridge Drivers, Integrated Circuits (ICs), IC MOTOR DRIVER PAR 20HSOP
Freescale Semiconductor Technical Data
H-Bridge Driver
The 33186 Is A Monolithic H-bridge Ideal For Fractional Horsepower Dc-motor And Bi-directional
Thrust Solenoid Control. The Ic Incorporates Internal Control Logic, Charge Pump, Gate Drive, And
Low Rds(on) Mosfet Output Circuitry. The 33186 Is Able To Control Continuous Inductive Dc Load
Currents Up To 5.0 A. Output Loads Can Be Pulse Width Modulated (pwmed) At Frequencies Up To 10 Khz.
This device is powered by SMARTMOS technology.
The 33186 Is Parametrically Specified Over A Temperature Range Of -40 C Ta 125 C, 5.0
V V+ 28 V. The Ic Can Also Be Operated Up To 40 V With De-rating Of The Specifications. The
Ic Is Available In A Surface Mount Power Package With Exposed Pad For Heat Sinking.
FEATURES
Overtemperature, Short-circuit Protection, And Overvoltage Protection Against Transients Up To 40 V
at VBAT, typical
RDSON = 150 m for each output transistor at 25 C
Continuous DC load current 5.0 A (TC < 100 C
Output current limitation at typ 6.5 A 20%
Short-circuit shutdown for output currents over 8.0 A
Logic Inputs TTL/CMOS compatible
Operating frequency up to 20 kHz
Undervoltage disable function
Diagnostic output, 2 disable input
Coding input for alternative functions
Stable operation with an external capacitance of 47 F minimum at
Document Number: MC33186 Rev. 8.0, 4/2013
H-BRIDGE MOTOR DRIVER
VW SUFFIX (PB-FREE) 98ASH70702A 20-PIN HSOP
ORDERING INFORMATION
Device (For Tape and Reel,
add an R2 suffix)
Temperature Range (TA)
Package
MC33186HVW1 MC33186HVW2
- 40 to 125 C
20 HSOP
MCU or DSP
OUT1 SF
MOTOR IN1
Figure 1. 33186 Simplified Block Diagram